Recent posts

#11

CANtieCAR / ISO 22900 support?

Last post by pupu14 - January 25, 2024, 18:50:36

Hello!

Do you have any plans to implement ISO-22900 API?  (can it be supported by v4.5/5.0 hardware at all..?)

I have found that there were a few attempts to make an open-source wrapper for J2534 tools, but development stalled.
Maybe you can find it of interest to implement this further for CtC. Links:
1) https://github.com/JohnJocke/dpdu-passthru
2) https://github.com/DiagProf/ISO22900.II

The main benefit of ISO-22900 support would be the ability to work with GM Tech2Win software - that's a lot of GM, Saab, Opel vehicles up to -2014 years.
Unfortunately I do not have any vehicles to test if the driver from first links is working with CtC.

Also I see that a lot of OEM soft uses D-PDU API anyway for their tools. I don't know if there would be any gains for other aftermarket tools..


I would like to hear your opinion on this topic Oleksandr (admin)!  :)

#12

CANtieCAR / Re: tiecar multiplexed bluetoo...

Last post by Oleksandr - December 08, 2023, 09:57:12

try install Microsoft driver/stack on the bluetooth module/device

#13

CANtieCAR / tiecar multiplexed bluetooth

Last post by prosec - December 07, 2023, 17:53:59

i have tiecar v3 with bluetooth
bluetooth connection ok and settings multiecuscan comport name ok
but not work with bluetooth
help me my problem

[new Configurator]

#14

CANtieCAR / CANtieCAR Wi-Fi Native Support

Last post by Oleksandr - November 24, 2023, 14:44:05

Released new Configurator and Firmwares for CANtieCAR v4.x and CANtieCAR v5.0 with new Passthru Driver

Full native networking over WiFi (AP and/or STA) is supported!

To install Passthru Driver the new Firmwares are required Latest Configurator

#15

CANtieCAR / Re: J2534 Toolbox 2

Last post by Oleksandr - November 09, 2023, 11:41:55

When I select the J2534 tab in the configurator, it tells me I am on driver v2.6.1204.

On the device drop down tab, do I select cantiecar or cardaq plus?

the tab is for testing - you can select any driver which is installed on the PC
and if device is attached configurator will read version info from it

#16

CANtieCAR / Re: Upgrade to CANtieCAR v5.0

Last post by Oleksandr - November 09, 2023, 11:37:59

ok, what do i have to do to get this done? what is the process?

send request to can@tiecar.net
===
- find CANtieCAR on COM-port
- press Copy to Buffer
- paste buffer in e-mail message

#17

Genuine / Re: AVT-852

Last post by Oleksandr - November 09, 2023, 11:35:44

What would it take to get Tiecar to emulate one of these.

https://www.avt-hq.com/852_hw.htm

yes
i have spoken with one old customer
there is not high depand for the mode...
you are second for last 2 years

i remember they have AVT-853 - the same as AVT-852 but with network interface
(AVT-852 and AVT-853 have the same firmware)

#18

Genuine / AVT-852

Last post by Tune EMS - November 07, 2023, 20:55:18

What would it take to get Tiecar to emulate one of these.

https://www.avt-hq.com/852_hw.htm

#19

CANtieCAR / J2534 Toolbox 2

Last post by Tune EMS - November 04, 2023, 01:56:11

does anyone have their cantiecar working on Drew Tech J2534 Tool Box 2? I am trying to set mine up. I assume I need to configure it to "PassThru SAE J2534-1/2 (CAN-Terminator:Auto)"


When I select the J2534 tab in the configurator, it tells me I am on driver v2.6.1204.

On the device drop down tab, do I select cantiecar or cardaq plus?

#20

CANtieCAR / Re: Upgrade to CANtieCAR v5.0

Last post by Tune EMS - November 03, 2023, 23:39:30

ok, what do i have to do to get this done? what is the process?