Recent posts

#71

CANtieCAR / Re: V4 getting hot after 5-6 m...

Last post by sparky001 - February 08, 2021, 00:35:55

Hi,
Version 4.1
Seems to be 221 cap getting hot. The one closest to the status and activity indicators

[0]

#72

CANtieCAR / Re: V4 getting hot after 5-6 m...

Last post by Oleksandr - February 07, 2021, 13:17:47

just unscrew and replace heated up part...
perhaps that is tantalum capacitor in size D or E

what is minor hardware version? - 4.0 or 4.1 etc.

#73

CANtieCAR / V4 getting hot after 5-6 minut...

Last post by sparky001 - February 04, 2021, 22:55:42

Heya all,
My V4 interface has suddenly started to heat up after about 5-6 minutes
Communication will stop, unplug from OBD & laptop, wait till it cools, then reconnect works again 5-6 minutes
Any ideas??  Should I open?? I use it almost every day........

#74

CANtieCAR / Re: Обновления

Last post by mestnyi - November 30, 2020, 13:15:15

с "CANtieCAR4_RC_BW04020524_FW04020184.rfw"
снова доступны:
OP1 - OpenPort v1.0
OP2 - OpenPort v1.2
OP3 - OpenPort v1.3 Universal (11:Vpp/Boot).
Спасибо Александр!

#75

CANtieCAR / Re: Nissan CS3+ V202

Last post by sparky001 - October 19, 2020, 20:52:00

Thanks,
installed V73. All working well sofar

Cheers

#76

CANtieCAR / Re: Nissan CS3+ V202

Last post by Oleksandr - September 18, 2020, 17:06:41

seems they stopped a support general passthru adapters...
use old versions of search way to open the feature

#77

CANtieCAR / Nissan CS3+ V202

Last post by sparky001 - August 26, 2020, 03:26:27

Heya,
I had Cantiecar working with V62 of Nissan CS3+
Have updated to V202 - Can not get it to see Interface

Any ideas???

Cheers

#78

CANtieCAR / Re: Techstream driver

Last post by Oleksandr - June 19, 2020, 21:58:44

try official web-site
maybe they had patched to use own hw...

#79

CANtieCAR / Re: Techstream driver

Last post by dbh97 - June 10, 2020, 00:04:59

Techstream still isn't working. Is there anything else I have to do? This is a copy of techstream I downloaded from eobdtool.co.uk. Is there anything wrong with that?

#80

CANtieCAR / Re: Techstream driver

Last post by Oleksandr - June 09, 2020, 21:40:44

i have forgotten...
0 - start Configurator (CANtieCAR.exe - that is your main tool to work with it)