.:: tieCAR.net Forum
Products Support => CANtieCAR => Topic started by: Oleksandr on April 19, 2010, 16:22:18
-
Licznik 4.8a w/o Dongle (http://www.tiecar.net/downloads/sw/Licznik4.8a_wo_Dongle.zip)
-
VAG Commander K+CAN - version 3.6 (working) (http://www.tiecar.net/downloads/sw/VAG_K+CAN_Commander_v36.zip)
VAG Commander K+CAN - version 2.5 (good working!!!) (http://www.tiecar.net/downloads/sw/vagk+can25_neednot_dongle.rar)
VAG Commander K+CAN - version 1.4 China (http://www.tiecar.net/downloads/sw/K_CAN_VAG_COMMANDER_14.ZIP) (great working!!! update your device with Lastest firmware (http://www.tiecar.net/CANtieCAR_Firmware))
VAG Commander CAN - other different versions (http://www.tiecar.net/downloads/sw/VKCC_ALL.ZIP)
-
CMD MPC5xx BDM Programmer v1251 (http://www.tiecar.net/downloads/sw/CMD_BDM_v1251.zip)
CMD EDC16 OBDII Flasher v1251 - CAN (http://www.tiecar.net/downloads/sw/CMD_1251.rar)
CMD EDC16 OBDII Flasher v1255 - K-Line (http://www.tiecar.net/downloads/sw/CMD_1255c.zip)
-
Opel Global TIS + TIS2Web + Tech2Win - vmware
http://rutracker.org/forum/viewtopic.php?t=4153407
работет с режимом j2534,PassThru Mongoose ISO/CAN( с каким точно не знаю)
-
(http://)
Opel GlobalTIS v32.0 B Multilanguage
http://rutracker.org/forum/viewtopic.php?t=3915368
за активацией стучимся в ggogle talk - extracomplex
-
Subaru Select Monitor III 2013/1
1.36.50.8-RUS! + ENGLIH
https://www.dropbox.com/sh/ayzk5sm9j0d5p4m/FZcwe6NodL/01_2013_DVD_FULL.rar
1.15.33.3
Englih http://rapidshare.com/files/446083316/Subaru.mdf
-
На сегодняшний день работает с етим софтом- DiagBox 7.33 в режиме Passthru
(Citroen,Peugeot) http://rutracker.org/forum/viewtopic.php?t=4356706
Большая благодарность создателям етого девайса :)
To date, work with this software-DiagBox 7.33 Passthru mode (Citroen, Peugeot) http://rutracker.org/forum/viewtopic.php?t=4356706
Big thanks to the creators of this device :)
-
BMW Rheingold 3.41 [2014] Работает с Inpa Ediabas, D/CAN
Работает проверено на BMW 740 E38 2000/11 20-pin
Windows 8/64
BMW Rheingold 3.41 [2014]
Works with Inpa Ediabas, D / CAN
Verified working on BMW 740 E38 2000/11 20-pin
http://rutracker.org/forum/viewtopic.php?t=4651956
файл для активации вложить в эту папку/file to activate put in this folder
C:\Program Files (x86)\Rheingold\TesterGUI\bin\Release
-
VAG - ODIS J2534
http://rutracker.org/forum/viewtopic.php?t=4512253
пач для работы с CanTieCar
http://www.carhelp.info/forums/attachment.php?attachmentid=127052&d=1382868276
-
Honda HDS 2.024.005 + ECU Rewrite 6.24.04
http://rutracker.org/forum/viewtopic.php?t=3450634
HDS Honda Acura 3.002.032
http://rutracker.org/forum/viewtopic.php?t=4363701
-
Mr TizWaz`s Solution on Mhh forum works great with Newest Honda HDS 3.012.030
http://mhhauto.com/Thread-HONDA-HDS-3-012-030-TizWaz-FULL-Build?page=6
It is a full torrent with Video instructions
Regards
-
You have try it with CanTieCar ??
-
Yes Sir, Working like a Charm ! Connected to a 2001 CRv I had here.
Also Scanned a 2013 VW GLI from Body shop, Had a host of stored codes , Cleared them all, using the New ODIS and CTC.
Body Shop guys like to store codes in modules it seems. :-)
Unable to get the Subaru working as of yet..or Nissan. But hear Glowing reports about Mercedes DAS and the CTC.
-
How you get it working, I cannot connect to car, Hoda HDS don's see CTC. Can you describe your way to connection with car ?
-
PM sent.
I use the spx-mvci changing the device-etc..
Copied from Mhh forum
o.k location to put dealer number is
"HKEY_CURRENT_USER\\Software\\GenRad\\Honda\\Setup\\DealerNumber"=
that is for usa, if you use other region , just use dealer number on install
places to change the interface
"HKEY_CURRENT_USER\\Software\\Teradyne\\Honda\\Setup\\CurrentCommsDevice"="SPX-MVCI"
[HKEY_CURRENT_USER\Software\Teradyne\Honda\Setup]
"CurrentCommsDevice"="SPX-MVCI"
you can test for immofunction and keygen working , if not i post a fix
if you want to install for GNA600 BUT NOT USA
THEN JUST INSTALL HDS For your region and install ECUREWRITE for USA and then just change the country code in regedit
if you are using X-Horse CABLE MINI VCI (MOST ONLY WORKING CAN-BUS) I Think x-horse MVCI(3IN1) IS WORKING O.K, install for GNA600 Also, you need to remove or rename GNAReprogramming.dll < THIS ALSO WILL WORK FOR GNA600'S AND OTHER TOOLS THAT DOES NOT TAKE FIRMWARE UPDATE that use GNA AS A BASE INSTALL
-
Hello, Thanks for reply but I done what. I think my CTC is a problem, When i test it without power (12V from car) everything on test looking green. When i plug(give_ external power i have errors mostly 2 , but only when i have plus CTC to OBD. Plunging external power to (pin 4,5"-") and pin 16 "+" give me no errors. I think that's why my Passtrue mode don't work.
-
First off. Make sure your Configurator and Firmware are up to latest(here on site)
If you are testing without car and power supplied it will only blink the led`s on CTC and always give no com error.
Perhaps you should allow someone in to see your problem( teamviewer ) and Skype to use for communication perhaps?
We KNOW it works and doubt there is a problem with interface, I have used my original one for more than 8 years..I cannot break it.
Allow me to help you perhaps? Get the Free Teamviewer and Syype..
Skype= sleuth_er then we can set up quick id to take a look.
Regards
-
Nissan Consult 3 Plus working with CTC :o
https://mega.co.nz/#!LtwE2Tbb!3xFOQEqnUWNnFRsjdfKa5l_pSe9G919PiEDXkU-38pY
Pass: TizWazzaWziT
INI file for CTC:
https://mega.nz/#!5UB32ZLK!051OBOR9p4ZCXsZ68cQ-CvZGi48-KzcDllt9ybn5hWU
No pass.
Tetsed with WIN7 and WIN XP PRO SP3.
Both install fine and work.
Found the software to be slow and some other glitches.
But hey, this might be only on my computers or i might missing something.
Best regards,
BADMOJO.
EDIT
Problem seems to have resolved after latest Configurator and RC file release. ;D ;D ;D
-
How you get it working, I cannot connect to car, Hoda HDS don's see CTC. Can you describe your way to connection with car ?
You have to change option VCI from HDS settings and set it to CANtieCAR.
Then it will work like a charm. ;D
-
Posts: 17
Opel GlobalTIS v32.0 B Multilanguage
Hello, help please configure the GDS2 application with CANtieCAR interface passthru
SPS = ok CANtieCAR communication ok
GDS2 =?
(http://garageforum.org/attachment.php?aid=5779)