.:: tieCAR.net Forum
Products Support => CANtieCAR => Topic started by: tapi0 on September 13, 2022, 04:34:37
-
I tried to install drivers for my new CANtieCAR 4.5 and it does not found any drivers for it.
I looked up inside of the tcnbus.inf and ftdibus.inf: there is no DeviceDesc for my CANtieCAR device.
I manually edited those two to add proper DeviceDesc and device id's and got those work.
But then it wants driver for USB Serial Port too and I think that driver is tcnport.inf which does not have correct DeviceDesc and device id nether.
I put those in there also but it still does not work.
I'm trying to install this for Win XP but that should not matter.
-
Hello,
Use drivers which are stored on your device built-in storage (SD card).
Or move "CompositeCDCSerial_64.inf" from folder CDC to tieCAR.net, if you let Windows install drivers from that folder only
-
Well the drivers on built-in storage are v.2.08.14 at this case.
Those drivers are made in 2011 and supposed to be newest ones.
-
CANtieCAR use different drivers because it is emulated different usb-devices
read here
- http://tiecar.net/downloads/CANtieCAR_First_Time_Drivers_Installation.pdf (http://tiecar.net/downloads/CANtieCAR_First_Time_Drivers_Installation.pdf)
- http://tiecar.net/downloads/CANtieCAR_v2x_Service_Flow.pdf (http://tiecar.net/downloads/CANtieCAR_v2x_Service_Flow.pdf)
-
Mine still doesn't work, when i try updating the drivers. Windows saids it already have the best driver installed.
Can anyone help?
-
Try hardware reset to Loobback – press service button before usb connect and hold if until windows would found the device
- http://tiecar.net/downloads/CANtieCAR_v2x_Service_Flow.pdf
Regards, tieCAR.net Company ::.
This helped to get my CantieCar 4.5 to work and I'm able to use Multiecuscan now. 8)
So thank you!