Author Topic: CAN Hacker not working in BMW JBE KCAN Mode  (Read 20389 times)

mcrussell

  • Newbie
  • *
  • Posts: 6
CAN Hacker not working in BMW JBE KCAN Mode
« on: March 14, 2014, 17:08:45 »
Does anyone know how I can view CAN traffic with CAN HACKER while in BMW JBE KCAN Emulator mode or does the CanTieCAR only sniff traffic while in normal OBD mode?

sleuth

  • Newbie
  • *
  • Posts: 5
  • CTC is the Best Interface
Re: CAN Hacker not working in BMW JBE KCAN Mode
« Reply #1 on: March 14, 2014, 21:20:28 »
Not familiar with CAN  Hacker, but if you are connected to bmw--device with CTC..and have a splitter cable and another device(ctc-in CAN hacker mode?) I see no reason why you would not see data.

Don`t think you can run 2 devices with one interface

 I believe Vector/softing  makes wares to do this.

Could depend on the year and country also, seems Bmw only allowed obd2 protocols for some years on usa cars--thru obd 2 socket. The 20 pin socket had everything on it.

But in jbe mode you are bench testing/sorting your controller?

This is Probably way over My Head..just a layman here, but though I would respond.

Regards,
D

mcrussell

  • Newbie
  • *
  • Posts: 6
Re: CAN Hacker not working in BMW JBE KCAN Mode
« Reply #2 on: March 18, 2014, 10:47:34 »
Thanks for the reply, I managed to get CANHACKER to see the CTC when I put it into the basic mode but still couldn't see any traffic