Author Topic: Software for trionic 5.2, 5.5, 7, 8 working with Lawicel emulation via CANtieCAR  (Read 46296 times)

ViGGeN

  • Moderator
  • Newbie
  • *****
  • Posts: 4
http://www.tiecar.net/downloads/SAAB/T5CanFlash.msi
http://www.tiecar.net/downloads/SAAB/T7CanFlash.msi
http://www.tiecar.net/downloads/SAAB/T8CanFlash.msi

[eng] T5flash – software to read and write full flash from Trionic 5.2 and 5.5 cars via CANBUS. Those are SAAB 9000 (1993-1998), SAAB 900 turbo versions only (1994-1998), Saab 9-3 turbo petrol versions (1998-1999 Red Direct Ignition Cassette)
T7flash  – software to read and write full flash from Trionic 7 cars via CANBUS those are: SAAB 9-5 Only petrol versions (1998-2009), SAAB 9-3 Petrol Versions (1998-2003 Black Direct Ignition Cassette)
T8Flash– software to read and write flash from Trionic 8 cars via CANBUS tested on SAAB 9-3SS petrol versions (2003-2008), should work on Opel and Cadillac cars with 2.0 turbo engine, not tested yet. Read and Write are verified, recovery mechanism, IS Working and Verified..
Support and additional info, plussoftware for working with motronics via cantiecar could be found on http://www.ecuproject.com
[/eng]

[rus]
T5flash – чтение и запись прошивок в Trionic 5.2 и 5.5 через CANBUS. Поддерживаемые автомобили SAAB 9000 (1993-1998), SAAB 900 турбированные версии(1994-1998), Saab 9-3турбобензиновые версии (1998-1999 С красной кассетой зажигания)
T7flash – чтение и запись флэш в машинах через CANBUS с блоками управления TRIONIC 7 поддерживаются: все бензиновые версии SAAB 9-5 (1998-2009), SAAB 9-3 бензиновые версии(1998-2003 Черная кассета зажигания)
T8Flash – чтение и запись прошивок в машинах с блоком управления TRIONIC 8 через CANBUS на настоящий момент протестирована работа с SAAB 9-3Спорт Сдеан бензиновые версии(2003-2008), возможно будет работать с Opel и Cadillac с мотормо 2.0 турбо. Чтение и запись протестированы и работают, аварийное восстановление блоков.
Поддержка и дополнительная информация доступны по адресу www.ecuproject.com. Так же, имеется программное обеспечение для работы с мотрониками через адаптер кантикар.
[/rus]


« Last Edit: May 05, 2012, 01:44:39 by ViGGeN »

bsparky

  • Newbie
  • *
  • Posts: 8
hi i have a 93 ecu to play with what are pin connections please for lawicel  ecu= 5171434 ?


many thanks regards bsparky

ViGGeN

  • Moderator
  • Newbie
  • *****
  • Posts: 4
Looks like you have a car with b204 engine. This means that you have a car with Trionic 5.5 ECU. I think that this file will answer tons of your questions... http://trionic.mobixs.eu/Trionic%205.pdf

bsparky

  • Newbie
  • *
  • Posts: 8
hi many thanks viggen for that link

best regards

ViGGeN

  • Moderator
  • Newbie
  • *****
  • Posts: 4
You can ask any questions in here, i'll be glad to answer them.

inergen

  • Newbie
  • *
  • Posts: 1

hi,

i suppose that this CANtieCAR is the interface hardware to read, flash and download the tune from the ecu. similar to the CMD, powergate, etc.

iL

ViGGeN

  • Moderator
  • Newbie
  • *****
  • Posts: 4
Sorry for not answering for long time...
Yep. You can use CANtiecar to read/write saab petrol ecu's which are trionic 5.5, trionic 5.2, trionic 7 and trionic 8.
The last one can be read via OBD port, t5 and t7's need a little reiring or could be read on desk... You can get all the info to do that.