Author Topic: 2.08.14 drivers does not work with CANtieCAR 4.5  (Read 760 times)

tapi0

  • Newbie
  • *
  • Posts: 3
2.08.14 drivers does not work with CANtieCAR 4.5
« on: September 13, 2022, 04:34:37 »
I tried to install drivers for my new CANtieCAR 4.5 and it does not found any drivers for it.
I looked up inside of the tcnbus.inf and ftdibus.inf: there is no DeviceDesc for my CANtieCAR device.

I manually edited those two to add proper DeviceDesc and device id's and got those work.
But then it wants driver for USB Serial Port too and I think that driver is tcnport.inf which does not have correct DeviceDesc and device id nether.

I put those in there also but it still does not work.

I'm trying to install this for Win XP but that should not matter.

pupu14

  • Newbie
  • *
  • Posts: 2
Re: 2.08.14 drivers does not work with CANtieCAR 4.5
« Reply #1 on: September 13, 2022, 19:38:09 »
Hello,

Use drivers which are stored on your device built-in storage (SD card).
Or move "CompositeCDCSerial_64.inf" from folder CDC to tieCAR.net, if you let Windows install drivers from that folder only

tapi0

  • Newbie
  • *
  • Posts: 3
Re: 2.08.14 drivers does not work with CANtieCAR 4.5
« Reply #2 on: September 13, 2022, 23:43:11 »
Well the drivers on built-in storage are v.2.08.14 at this case.
Those drivers are made in 2011 and supposed to be newest ones.

Admin

  • Administrator
  • Full Member
  • *****
  • Posts: 145
    • tieCAR.net Forum ::.
Re: 2.08.14 drivers does not work with CANtieCAR 4.5
« Reply #3 on: September 30, 2022, 21:15:56 »
CANtieCAR use different drivers because it is emulated different usb-devices
read here
- http://tiecar.net/downloads/CANtieCAR_First_Time_Drivers_Installation.pdf
- http://tiecar.net/downloads/CANtieCAR_v2x_Service_Flow.pdf


Highland

  • Newbie
  • *
  • Posts: 1
Re: 2.08.14 drivers does not work with CANtieCAR 4.5
« Reply #4 on: October 06, 2022, 10:54:45 »
Mine still doesn't work, when i try updating the drivers. Windows saids it already have the best driver installed.

Can anyone help?

tapi0

  • Newbie
  • *
  • Posts: 3
Re: 2.08.14 drivers does not work with CANtieCAR 4.5
« Reply #5 on: October 18, 2022, 21:58:44 »
Quote
Try hardware reset to Loobback – press service button before usb connect and hold if until windows would found the device

- http://tiecar.net/downloads/CANtieCAR_v2x_Service_Flow.pdf


Regards, tieCAR.net Company ::.
This helped to get my CantieCar 4.5 to work and I'm able to use Multiecuscan now.  8)
So thank you!