Recent posts

#11

CANtieCAR / Re: ISO 22900 support?

Last post by pupu14 - January 31, 2024, 21:29:17

Understandable.
So, that's more like a "no" answer? Or "maybe in the future"?  :D

#12

CANtieCAR / Re: ISO 22900 support?

Last post by Oleksandr - January 29, 2024, 18:02:27

i have consider d-pdu support and investigated 22900 standards
on my opininion that is very strange standard's tree...
they want to add more osi levels to hardware adapter or to driver
22900 can be emulated over j2534

#13

CANtieCAR / ISO 22900 support?

Last post by pupu14 - January 25, 2024, 18:50:36

Hello!

Do you have any plans to implement ISO-22900 API?  (can it be supported by v4.5/5.0 hardware at all..?)

I have found that there were a few attempts to make an open-source wrapper for J2534 tools, but development stalled.
Maybe you can find it of interest to implement this further for CtC. Links:
1) https://github.com/JohnJocke/dpdu-passthru
2) https://github.com/DiagProf/ISO22900.II

The main benefit of ISO-22900 support would be the ability to work with GM Tech2Win software - that's a lot of GM, Saab, Opel vehicles up to -2014 years.
Unfortunately I do not have any vehicles to test if the driver from first links is working with CtC.

Also I see that a lot of OEM soft uses D-PDU API anyway for their tools. I don't know if there would be any gains for other aftermarket tools..


I would like to hear your opinion on this topic Oleksandr (admin)!  :)

#14

CANtieCAR / Re: tiecar multiplexed bluetoo...

Last post by Oleksandr - December 08, 2023, 09:57:12

try install Microsoft driver/stack on the bluetooth module/device

#15

CANtieCAR / tiecar multiplexed bluetooth

Last post by prosec - December 07, 2023, 17:53:59

i have tiecar v3 with bluetooth
bluetooth connection ok and settings multiecuscan comport name ok
but not work with bluetooth
help me my problem

[new Configurator]

#16

CANtieCAR / CANtieCAR Wi-Fi Native Support

Last post by Oleksandr - November 24, 2023, 14:44:05

Released new Configurator and Firmwares for CANtieCAR v4.x and CANtieCAR v5.0 with new Passthru Driver

Full native networking over WiFi (AP and/or STA) is supported!

To install Passthru Driver the new Firmwares are required Latest Configurator

#17

CANtieCAR / Re: J2534 Toolbox 2

Last post by Oleksandr - November 09, 2023, 11:41:55

When I select the J2534 tab in the configurator, it tells me I am on driver v2.6.1204.

On the device drop down tab, do I select cantiecar or cardaq plus?

the tab is for testing - you can select any driver which is installed on the PC
and if device is attached configurator will read version info from it

#18

CANtieCAR / Re: Upgrade to CANtieCAR v5.0

Last post by Oleksandr - November 09, 2023, 11:37:59

ok, what do i have to do to get this done? what is the process?

send request to can@tiecar.net
===
- find CANtieCAR on COM-port
- press Copy to Buffer
- paste buffer in e-mail message

#19

Genuine / Re: AVT-852

Last post by Oleksandr - November 09, 2023, 11:35:44

What would it take to get Tiecar to emulate one of these.

https://www.avt-hq.com/852_hw.htm

yes
i have spoken with one old customer
there is not high depand for the mode...
you are second for last 2 years

i remember they have AVT-853 - the same as AVT-852 but with network interface
(AVT-852 and AVT-853 have the same firmware)

#20

Genuine / AVT-852

Last post by Tune EMS - November 07, 2023, 20:55:18

What would it take to get Tiecar to emulate one of these.

https://www.avt-hq.com/852_hw.htm