Recent posts

#1

BMW / Re: tieCar adapter instead of ...

Last post by pupu14 - Today at 16:39:07

Hello,

Install BMW Passthru driver. MUST be v 2.1.0.0 - other ones does not work so well (or at all).
There are plenty of guides on the internet on this topic - just search "ISTA passthru driver".
Then, must choose Ediabas option in ISTA connection settings.

ISTA-P (cracked, with a launcher) will not work, only ISTA-D.

#2

BMW / tieCar adapter instead of ICOM

Last post by andrii - Today at 07:03:55

Hello, everyone.
I`m sorry for maybe stupid question - is there a way to use tieCar adapter with ISTA instead of OEM ICOM?
If yes - could you, please, advice which settings needed?
As i know, the ICOM uses an IP address.
Thank you.

#3

CANtieCAR / Re: CANtieCAR Wi-Fi Native Sup...

Last post by pardul - March 15, 2024, 07:55:33

It was easy
when ctc was conected to acces point, just must search it in network tab in configurator and then it works

#4

CANtieCAR / Re: CANtieCAR Wi-Fi Native Sup...

Last post by Oleksandr - March 14, 2024, 07:55:47

I done it, works. Thank you. Good job!!

it would be great if you share your experience with everyone :-)

#5

CANtieCAR / Re: CANtieCAR Wi-Fi Native Sup...

Last post by pardul - March 13, 2024, 23:20:10

I done it, works. Thank you. Good job!!

[Settings]

#6

CANtieCAR / Re: CANtieCAR Wi-Fi Native Sup...

Last post by Oleksandr - March 13, 2024, 15:11:10

passthru driver will find CANtieCAR if Configurator found it once
i am going to create user manual for networking few later

short tips for Configurator
===
Settings Tab - select port, find CANtieCAR, switch modes
Update Tab - reset CANtieCAR or upload firmware
Network Tab - manage network ports
Passthru SAE J2534 Tab - install Passthru driver and check Passthru adapters
About Tab - About...
System Tab - About CANtieCAR, switching default wireless link Bluetooth-WiFi, reset and update WiFi chipset
WiFi Tab - manage configuration of WiFi chipset - SoftAP, Station (connection to router/hotspot) etc.
Test Tab - testing of all CANtieCAR hardware

#7

CANtieCAR / Re: CANtieCAR Wi-Fi Native Sup...

Last post by pardul - March 13, 2024, 13:37:19

Can you explain how to setup some program to j2534 over wifi? Tried yesterday with odis and forscan but no luck,

#8

CANtieCAR / Re: CANtieCAR Wi-Fi Native Sup...

Last post by Oleksandr - March 13, 2024, 09:28:29

Hi.
what is that for? Can i use passthru over wifi??

yes of course
now you can use USB, Bluetooth and WiFi for Passthru - Passthru driver supports all on them

#9

CANtieCAR / Re: CANtieCAR Wi-Fi Native Sup...

Last post by pardul - March 12, 2024, 23:13:11

Hi.
what is that for? Can i use passthru over wifi??

#10

CANtieCAR / Re: ISO 22900 support?

Last post by Oleksandr - February 03, 2024, 16:42:54

i definitely will not do it myself.
so i need to hire couple coders to do this job...
but i have serious doubts about the reasonability of this project